Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 35Saving changesAfter making changes in a window, click the Set button to send the new settingsto the unit and save them there.NoteSave the changes made in each window by clicking Set. Clicking the Setbutton saves only the settings in the current window. Changes in any otherfields are ignored.Click on the Settings link at the top of the window to close the window withoutsaving the changes made.General SettingsVarious basic data for the camera can be set or selected here.Camera identificationCamera nameThe camera can be assigned a name to assist in identifying it. The namesimplifies the management of multiple devices in more extensive systems, forexample using the VIDOS software.NoteThe camera name is used for remote identification of a unit, in the eventof an alarm for example. Enter a name that makes it as easy as possible toidentify the location unambiguously.Camera IDEach camera should be assigned a unique identifier that can be entered here asan additional means of identification.Bosch Security Systems | 2006-05 | V2.0