Dinion IP - NWC-0495 - Bosch

EN | 28Dinion IP | Installation ManualDigital I/ODepending on the configuration of the unit, the alarm input and the relay outputare displayed next to the camera image. The alarm symbol is for information andindicates the input status of the alarm input: Active 1 = Symbol is green, Active 0= Symbol not lit. The relay on the camera allows you to operate a device (forexample a light or a door opener).– To operate, click the relay symbol next to the video image. The symbol is redwhen the relay is activated.System log / Event logThe System log field contains information about the operating status of thecamera and the connection. These messages can be saved automatically in a file.Events such as the triggering or end of alarms are shown in the Event log field.These messages can be saved automatically in a file.Saving snapshotsIndividual images from the video sequence that is currently being shown on theLivepage can be saved in JPEG format on the computer's hard drive.– Click the camera icon to save single images.– The image is saved at a resolution of 704 × 576/480 pixels (4CIF). Thestorage location depends on the configuration of the camera.Recording video sequencesSections of the video sequence that is currently being shown on the Livepage canbe saved on the computer's hard drive. The sequences are recorded at theBosch Security Systems | 2006-05 | V2.0