Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 23Adjustment procedure Manual-iris Lens1. Unlock the back focus locking button.2. Adjust the lens to the maximum lens opening.3. Turn the back focus adjustment as required.4. Lock the back focus locking button.Adjustment procedure Video-iris Lens1. Unlock the back focus locking button.2. Access the Lens Wizard menu.3. Set Back Focus Now is highlighted in the menu.4. Turn the back focus adjustment as required.5. Lock the back focus locking button.6. Select Set LVL in the menu; the Level bar appears.7. Point the camera at the scene it will be mostly viewing.8. Adjust the level potentiometer located on the lens until the Level bar is inthe central position.9. Exit the menu.NoteThe best performance with video iris lenses is obtained when the peak/average potentiometer of the lens matches the peak/average balanceconfiguration setting.Install IP address submenuTo operate the camera in your network, a network-valid IP address must beassigned. The factory default IP address is 192.168.0.1Function Selection DescriptionIP AddressEnter an IP address for the camera. Use LEFT/RIGHT to change position in the address, use UP/DOWN to select the digit. Use SELECT to exit theaddress edit screen.Subnet Mask Enter the Subnet mask (default 255.255.255.0)GatewayEnter a Gateway address.ExitReturn to the Install menuBosch Security Systems | 2006-05 | V2.0