Dinion IP - NWC-0495 - Bosch
Dinion IP - NWC-0495 - Bosch
Dinion IP - NWC-0495 - Bosch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN | 18<strong>Dinion</strong> <strong>IP</strong> | Installation ManualCautionTo avoid damaging the CCD sensor when using a C-mount lens, makesure the supplied lens adapter ring is mounted onto the camera beforemounting the lens.Lenses weighing more than 0.5 kg (1.1lbs) must be separately supported.<strong>Bosch</strong><strong>Bosch</strong>Pin Video iris lens DC iris lens1 Supply (11.5V ±0.5, 50mA max.) Damp -2 Not used Damp +3 Video signal 1Vpp 1kOhm Drive +4 Ground Drive -NoteIf a short circuit is detected on the lens connector, the on-screen display(OSD) failure message LENS SHORT CIRCUIT is shown. The lens circuitis automatically disabled to avoid internal damage. Remove the lensconnector and check the pin connections.Mounting the cameraThe camera can be mounted from the top or bottom. The bottom mounting isisolated from ground. With outdoor scenes, a DC-iris lens is recommended.<strong>Bosch</strong> Security Systems | 2006-05 | V2.0
Change language