Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 17NoteThe multicolored LED under the Ethernet connection indicates Power(red), IP connection (green) and IP traffic (green flashing). It can bedisabled in the Settings/Camera Settings/Installer optionsmenu.Video service monitorVIDEOALARMDC 12VAC 24V• connect a service monitor to the compositevideo BNC connector to aid installation.• a monitor connected close to the camera viathis connection can also be used in parallel withremote PC viewing.ETHAlarm connectorPin Alarm socket1 Ground2 Alarm in3 Relay out contact 14 Relay out contact 2AlarmPin 4Pin 1• Max. wire diameter AWG 22-28for both stranded and solid.• Default relay position n.o. (normallyopen), no alarm.• Alarm output relay switchingcapability: Max voltage 30VAC or+40VDC. Max 0.5 A continuous,10VA.• Alarm in: TTL logic, +5V nominal,+40VDC max, DC coupled with22kOhm pull-up to +3.3V.• Alarm in: configurable as activelow or active high.• Max. 42V allowed between cameraground and each of the relay pins.Lens mountingThe camera accepts CS-mount lenses with a lens protrusion of up to 5mm.C-mount lenses can be mounted using the lens adapter ring. DC-iris lenses arerecommended for the best picture performance. The camera automaticallydetects the type of lens used and optimizes performance accordingly. A sparemale lens connector is provided.Bosch Security Systems | 2006-05 | V2.0