Operating Manual - KLARO GmbH

L1L2L1 L2 L3L3Operating Manual for SBR small wastewater treatment systems13.2. Becker and Rietschle rotary slide compressorsNote:The Becker rotary slide compressors used by us are equipped with a pressure control valve that is factorypre-set to a maximum pressure of 0.5 bar.With our plants, an operating pressure of < 0.3 bar is common. If a pressure of > 0.5 bar (e.g. due to a bentair hose) occurs at the plant, a part of the air is blown off via the pressure control valve. Thus, thecompressor is protected against damage or excessive wear and tear.1.Warning NoticeHigh VoltageOnly qualified staff maywork on electroniccomponentsHigh Voltageaccording to ANSIAmerican, NationalStandardsInstituteQualified StaffMarked operations mayonly be executed byqualified electriciansAutomatic Start-UpWhen servicing thedevice must be turned offHot Surfacewill cause burns.Let device cool downbefore maintenanceNoteIgnoring notices willcause severe damage tothe pump2.InterdictionOilPump works without oilAvoid absorption of oilfumesMarked areasmay not be subject toweightLiquidsmay not be conveyedExplosive substancesmay not be conveyedFlammable Substancesmay not be conveyedToxic Substancesmay not be conveyedAssemblyIncorrect fitting position3.RulesWear protective gogglesWear protective glovesWear protective earmuffsSound level informatione.g. 85 dB (A)4.AdviceActive principleRotary vane pumpOnly air may be conveyedAIRActive principleside channel fan only airmay be conveyedMaintenanceRegularly execute themarked proceduresStoring / AssemblyProtect pump fromhumiditymax.800mAssemblyCharacteristic data isvalid up to 800m abovesea leveli +Further Information(optional Data)- name plate- Internet-pSpecificationVacuum pump+pSpecificationCompressorSafety valveVACUUMPRESSUREFactory-made Revolvingfield clockwise aspre-requisite for pumpattachment50/60 Hz =OFF=ONSwitch intervalNot more than10x per hourL2 L1 L3I > I > I >U1 V1 W1M 3Arrange Motor-circuitswitchBlow out marked areaswith air pressure3000 hMaintenance intervalObserve minimum gatevalve measurementevery 3.000 hoursFilter MaintenanceService according to dustaccumulation exchangeold cartridge dispose oldwww.becker-international.com60KLARO GmbH