Operating Manual - KLARO GmbH

More documents

Recommendations

Info

Operating Manual for SBR small wastewater treatment systemsKLARO GmbHSpitzwegstrasse 6395447 Bayreuth13EN 12566-3Prefabricated wastewater treatment plantfor the treatment of domestic wastewaterKLAROMaterial: concreteEffectiveness of the treatment:Efficiency of the purification performance COD: 86 %(with a tested organic contamination load aday ofBOD 5 : 95 %kgBOD = 50. 2 ) SS: 88 %dPurification capacity (calculation):- Nominal organic contamination load a day(BOD 5 )- Nominal inflow a day (Q N )Resistance to penetration of water: (test withwater)NH 4 -N*: 99 %(*for wastewater temperatures > 12°C)0.060.15kgPE ⋅ dm³PE ⋅dPassedStability: (static calculation)Durability:PassedPassed50KLARO GmbH
Operating Manual for SBR small wastewater treatment systemsEC declaration of conformityThe manufacturer:KLARO GmbHSpitzwegstrasse 63D-95447 Bayreuth (Germany)Telephone: +49-921-16279-0Fax: +49-921-16279-100Internet: www.klaro.euhereby declares that the product KLARO Easy, small wastewater treatment plant in plastic containers for4 to 50 PE, complies with the requirements laid down in the following directives and regulations:2011/305/EU2006/42/EC2006/95/EC“Regulation No. 305/2011 of the European Parliament and of the Council of9 March 2011 laying down harmonised conditions for the marketing of constructionproducts.”“Directive of the European Parliament and of the Council of 17 May 2006 onmachinery, and amending Directive 95/16/EC.”“Directive of the European Parliament and of the Council of 12 December 2006 onthe harmonisation of the laws of Member States relating to electrical equipmentdesigned for use within certain voltage limits.”The following harmonised standards were applied:EN 12566-3EN 60204-1EN ISO 13849-1“Small wastewater treatment systems for up to 50 PT – Part 3: Packaged and/orsite assembled domestic wastewater treatment plants”“Safety of machinery – Electrical equipment of machines – Part 1: Generalrequirements”“Safety of machinery – Safety-related parts of control systems – Part 1: Generalprinciples for design”This EC declaration of conformity becomes null and void when the product is modified without approval.Bayreuth, 9 th March 2011Waldemar Schütz(Chief executive officer)On behalf ofAlexander Kaufmann(Chief technical officer)KLARO GmbH 51
Page 1 and 2: Operating Manualfor SBR small waste
Page 3 and 4: Operating Manual for SBR small wast
Page 9: Operating Manual for SBR small wast
Page 42 and 43: 10. Technical dataOperating Manual
Page 60 and 61: L1L2L1 L2 L3L3Operating Manual for
Page 62 and 63: HOperating Manual for SBR small was
Page 72: KLARO GmbHSpitzwegstraße 6395447 B

Operating Manual - KLARO GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?