Operating Manual - KLARO GmbH

Operating Manual for SBR small wastewater treatment systems11. EC declaration of conformityThe manufacturer:KLARO GmbHSpitzwegstrasse 63D-95447 Bayreuth (Germany)Telephone: +49-921-16279-0Fax: +49-921-16279-100Internet: www.klaro.euhereby declares that the product KLARO, small wastewater treatment plant in concrete containers for4 to 50 PE, complies with the requirements laid down in the following directives and regulations:2011/305/EU2006/42/EC2006/95/EC“Regulation No. 305/2011 of the European Parliament and of the Council of9 March 2011 laying down harmonised conditions for the marketing of constructionproducts.”“Directive of the European Parliament and of the Council of 17 May 2006 onmachinery, and amending Directive 95/16/EC.”“Directive of the European Parliament and of the Council of 12 December 2006 onthe harmonisation of the laws of Member States relating to electrical equipmentdesigned for use within certain voltage limits.”The following harmonised standards were applied:EN 12566-3EN 60204-1EN ISO 13849-1“Small wastewater treatment systems for up to 50 PT – Part 3: Packaged and/orsite assembled domestic wastewater treatment plants”“Safety of machinery – Electrical equipment of machines – Part 1: Generalrequirements”“Safety of machinery – Safety-related parts of control systems – Part 1: Generalprinciples for design”This EC declaration of conformity becomes null and void when the product is modified without approval.Bayreuth, 9 th March 2011Waldemar Schütz(Chief executive officer)On behalf ofAlexander Kaufmann(Chief technical officer)KLARO GmbH 49