CompuScope SDK Manua.. - Egmont Instruments

Windows Sample ProgramsComplete MS Visual C/C++ sample projects that create executable files (*.exe) have been installed on yoursystem as part of the CompuScope SDK for C/C++ for Windows. By default, the SDK files are installed inthe C:\Gage\CompuScope SDK for Windows\SDK for C-C++. Within this folder, are several subfolders– one for each sample program. Each sample program folder contains all required files associatedwith the sample program and a Debug folder containing its built executable.In the table below, are the names and descriptions of the executable Windows Sample Programs. Completesource code is provided along with project files (*.DSW) for Microsoft Visual C. Other compilers maybe used but the user must construct the project files. Most of these executables generate ASCII data files.These ASCII files can be viewed by a simple text editor such as MS NotePad, by Microsoft Excel orby any other program capable of importing ASCII files.Program NameGAGE_BUSMASTERING.EXEGAGEA2D_MASTER_SLAVE.EXEGAGEA2D_MS_BM.EXEGAGEA2D_MUL_BM.EXEGAGEA2D_MUL_MS_BM.EXELocation and DescriptionThe sample program GAGE_BUSMASTERING captures asignal on a single CompuScope (in dual or single channelmode) and writes the data from all active channels to separateASCII data files. Data transfer is done using PCI busmasteringThis sample program captures a signal from all CompuScopesin a Master/Slave CompuScope system (in dual or singlechannel mode) and writes the data from all active channels toseparate ASCII data files.This sample program captures a signal from all CompuScopesin a Master/Slave CompuScope system (in dual or singlechannel mode) and writes the data from all active channels toseparate ASCII data files. Data transfer is done using PCI busmastering.The sample program GAGEA2D_MUL_BM, does a multiplerecord capture on a single CompuScope (in dual or singlechannel mode), and bus-masters the data to PC memory. Allthe records from all the channels are then written to separateASCII data files.The sample program GAGEA2D_MUL_MS_BM, does amultiple record capture from all CompuScopes in aMaster/Slave CompuScope system (in dual or single channelmode), and bus-masters the data to PC memory. All therecords from all the channels are then written to separateASCII data files.CompuScope SDK Manual Page 39