Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
.cStart-upInstallationThe <strong>DALI</strong> circuit is installed using standard installation material for mains voltage. The mains voltage and <strong>DALI</strong> linemay be routed in the same cable. There is therefore no need for a separate bus line, but one can be used if required.Figure: Wiring diagram<strong>DALI</strong> USB is needed only for set-up with masterCONFIGURATOR and can then be removed.Installing and connecting <strong>DALI</strong> GCStandard switches can be used for installing <strong>DALI</strong> GC. <strong>DALI</strong> GC is installed directly in a flush-mounted box,underneath or behind the light switch. Power is supplied to <strong>DALI</strong> GC via the bus line. It must not be connected to theac power supply. The switches are connected directly to <strong>DALI</strong> GC (floating make contacts).Turn rotary switch to position 1→ Group 1 is assigned to Switch T1→ Group 2 is assigned to Switch T2<strong>DALI</strong> Manual | 08-2013 | en73 / 93
Change language