You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.cDesigning a <strong>DALI</strong> applicationTable: GroupingDownlights Group 1Linear luminaires Group 2Conference room<strong>DALI</strong> GC Switch position = 1 (Group 1+2):Group 1 => Switch for downlightsGroup 2 => Switch for linear luminairesScene assignmentScenes are called up from two locations. Directly next to the door there is a double switch for switching the light on andoff. The control point next to the screen can also be used to switch the light on and off. In addition, two furtheruser-defined scenes (e.g. presentation) can be called up.Here too the scenes can be set up in two ways, with the <strong>DALI</strong> SC or with the masterCONFIGURATOR configurationsoftware (see Reference list).Table: Scene assignmentControl point near door<strong>DALI</strong> SC Switch position = 1 (Scenes 1-4):Scene 1 => Light offScene 2 => Light 100%Scenes 3 and 4 not wiredControl point near screenSwitch position = 1 (Scenes 1-4):Scene 1 => Light offScene 2 => Light 100%Scene 3 => PresentationScene 4 => Meeting...<strong>DALI</strong> Manual | 08-2013 | en66 / 93
Change language