DALI manual - Tridonic

.cDesigning a DALI applicationSample applicationsConference roomApplicationConference room for about 10 peopleRequirementThe lighting in the room consists of 6 linear luminaires and 2 LED downlights. The requirements for control are asfollows:The luminaire should be switched and controlled at either of two control points.There should be a section of different lighting scenarios (e.g. presentation)The luminaires must be capable of being dimmedSolution with DALI GC and DALI SCThe room is divided into two groups, one for the LED downlights and the other for the linear luminaires.There are two switching points available.One by the door for switching the lighting on and off. This is implemented with a DALI SC with the scenes “Lighting on”and “Lighting off”. The second by the window is implemented with a DALI SC and a DALI GC and enables any of fourscenes to be retrieved and both luminaire groups to be individually dimmed.DALI Manual | 08-2013 | en63 / 93