You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.c<strong>DALI</strong> sequencer module: <strong>DALI</strong> SQM<strong>DALI</strong> sequencer module: <strong>DALI</strong> SQMDescriptionThe SQM sequencer module enables a predefined time-controlled sequence to run automatically. The <strong>DALI</strong> SQMconstantly sends <strong>DALI</strong> signals with the set “step time”. These are broadcast-addressed scene calls. <strong>DALI</strong> scenes 0 to15 can be called up. The end scene, after which scene 0 is called up again, can be programmed and set to <strong>DALI</strong> scene7 on delivery. This means that a sequence of eight scenes is recalled.ConnectionThe <strong>DALI</strong> SQM is connected directly to the <strong>DALI</strong> circuit and does not need a separate power supply. It is powered viathe <strong>DALI</strong> circuit (current draw = 9 mA).It can be connected to the <strong>DALI</strong> circuit with either polarity.Basic functionsStart sequence <strong>DALI</strong> SQMConnect a floating contact / switchPress switch→ Sequence is startedSet delay timeTurn rotary switch to desired position (shortest time: 1 second, longest time: 30 minutes)<strong>DALI</strong> Manual | 08-2013 | en51 / 93