DALI manual - Tridonic

.cDALI TOUCHPANEL 02Table: Parameters for the dimming modeDimming mode selection Short press Long pressToggle ON/OFFToggles between the selected ON command andOFF commandDim up only Ignored On (if necessary) / fade upDim up and on for short press Perform the selected ON command On (if necessary) / fade upDim down only Ignored Fade downDim down and off for shortpressPerform the selected OFF commandFade downToggle up/down Ignored Toggle between fade up andfade downToggle up/down and on/off forshort pressToggles between the selected ON command andOFF commandToggle between fade up andfade downI NOTICESelecting ON or OFF in dimming mode not only allows you to switch the lighting on or off, you can also select whichspecific command for ON or OFF will be sent. ON and OFF are therefore variables.Example: Configuring the scene 1 buttonLogical addressDimming modeBroadcasttoggle ON/OFFON/OFF command ON command: “Go to scene 1” / OFF command: “Go to scene 1”Each time the button is pressed the command “Go to scene 1” is sent.Example: Conference room RequirementRequirementsOn/off switching at the doorDimming of all the lights (broadcast) at the control panel near the windowRetrieval of user-defined lighting scenes (e.g. the presentation scene) at the control panel near the windowDALI Manual | 08-2013 | en44 / 93