DALI manual - Tridonic

.cDALI TOUCHPANEL 02ConnectionThe DALI TOUCHPANEL 02 is connected directly to the DALI circuit and does not need a separate power supply. It ispowered via the DALI circuit (current draw = 6 mA in normal operation and 10 mA in service mode). It can beconnected to the DALI circuit with either polarity.Basic functionsFigure: Button assignments of the factory layout1) Scene buttons:Calling up scenes 1-32) Group buttons:Controlling assigned DALI devices or DALI groups.Short press: ON, OFFLong press: Dimming3) Finder LED:Red LED to find the panel in the dark.Long press: LED on/offFigure: Button assignments of the tunable white layout1) On-/Off button:Turning the Light on or OFF2) Dim whell:Recall of discrete dim calues by pressing on any position of the dim wheel.Dimming by sliding along the dim wheel.3) Finder LED:Red LED to find the panel in the dark.Long press: LED on/off4) Tunable White button:Change of the color temperature along the planckian locus via the buttons onthe right and left side. Adjusting to 4,500 K by pressing the button in the middle.Configuration by softwareThe masterCONFIGURATOR (since V2.6) software can be used to assign each of the buttons on theDALI-TOUCHPANEL 02. The DALI circuit can also be configured with the masterCONFIGURATOR (addressing,grouping, etc.). In addition to the masterCONFIGURATOR (since V2.6) software you will need a DALI USB for theconnection between the computer and the DALI circuit.The masterCONFIGURATOR has its own separate documentation (see Reference list).DALI Manual | 08-2013 | en43 / 93