You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.c<strong>DALI</strong> group controllers: <strong>DALI</strong> GC & GC-ATable: Momentary switch functions single switchDepress time single switchFunction40 to 300 ms On to max / Off> 300 ms On (if necessary) / dimGroup assignmentA rotary switch on the back of the module is used for group assignment. The switch setting shown corresponds togroup A. Group B is the group immediately following group A.Table: Group assignmentRotary switch setting Group switch 1 Group switch 20 Broadcast 11 1 22 2 33...9 3...9 4...10A...F 10...15 11...16Example:Rotary switch setting = 3, therefore:Switch 1 = group 3, switch 2 = group 4ProgrammingWith the <strong>DALI</strong>-GC it is also possible to address and configure simple <strong>DALI</strong> installations. The programming mode is notintegrated in <strong>DALI</strong>-GC-A so there is no chance of reprogramming the <strong>DALI</strong> units by mistake via the momentaryswitches.<strong>DALI</strong> Manual | 08-2013 | en25 / 93
Change language