User Manual M3000® Automation System / MSC II (Moog Servo ...

8 Shutdown and Service Service
8.2 Service
WARNING To avoid damage to M3000 ® modules or accessories,
cleaning, maintenance, and repair tasks may be performed
only by Moog or Moog's authorized service
agents.
Warranty and liability claims for personal and material damage
are excluded when, among other reasons, they are due
to unauthorized repairs or other unauthorized interventions.
�-"1.4-Warranty and Liability" on page 3
CAUTION To avoid damage to the internal components, never attempt
to open M3000 ® modules!
8.2.1 Maintenance/Servicing
M3000 ® modules are maintenance-free. They do not contain any components
(such as batteries) that must be maintained or replaced.
8.2.2 Repair
Only Moog and Moog's authorized service stations perform Moog Authentic
Repairs. Only Moog and Moog's authorized service agents can access the
required and most up-to-date specifications. These specifications make it
possible to restore the M3000 ® modules' original performance and ensure
the same high reliability and long service life of the M3000 ® modules after repairs
are completed.
Figure 50: Repair Seal
Moog's repair seal is the guarantee that a Moog Authentic Repair has been
carried out.
If Moog receives a repair order for defective M3000 ® modules, Moog
and Moog's authorized service agents reserve the right to repair the defective
module or, alternatively, to replace the defective module with a
module of identical or compatible specifications.
If Moog receives a repair order for defective M3000 ® modules, Moog
and Moog's authorized service agents accept no liability for software and
data installed by the customer. Like new modules, repaired modules or
replacement modules are delivered only with a bootloader.
Maintenance/Repair:
Safety Instructions
Maintenance/Servicing
Repair
Repair Seal
© Moog GmbH User Manual M3000 ® and MSC II (CA65865-001; Version 1.1, 08/08) 70