User Manual M3000® Automation System / MSC II (Moog Servo ...

5 Mechanical Installation DIN Rail Modules
5 Mechanical Installation
M3000 ® modules are divided according to their mechanical construction into
the following categories:
• DIN rail modules (such as MSC I, MSC II, QAIO, or QDIO)
• Other M3000 ® modules (such as RDISP)
Information about the DIN rail modules:
�-"5.1-DIN Rail Modules" on page 29
Refer to the relevant documentation for the dimensions of the other
M3000 ® modules and information about their mounting/removing.
5.1 DIN Rail Modules
5.1.1 Views of the Module
Locking Slide
Locating Pin
Q-Connector
(E-bus+LocalCAN Bus)
Connectors
for Plug-In
Terminal Strips
Connectors
with Plug-In
Terminal Strips
Locking Slide
Connectors
with Plug-In
Terminal Strips
Figure 14: Front View of DIN Rail Modules
Figure 15: Side View of DIN Rail Modules
Connectors for Plug-In
Terminal Strips
Front Panel
Q-Connector
(E-bus+LocalCAN Bus)
Locating Pin
Locking Slide
Q-Connector
(E-bus+LocalCAN Bus)
Locating Pin
Categories of
M3000 ® Modules
Front View of
DIN Rail Modules
Side View of
DIN Rail Modules
© Moog GmbH User Manual M3000 ® and MSC II (CA65865-001; Version 1.1, 08/08) 29