User Manual M3000® Automation System / MSC II (Moog Servo ...
User Manual M3000® Automation System / MSC II (Moog Servo ...
User Manual M3000® Automation System / MSC II (Moog Servo ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 Short M3000 ® <strong>System</strong> Overview <strong>MSC</strong> <strong>II</strong> Starter Kit<br />
3.2 <strong>MSC</strong> <strong>II</strong> Starter Kit<br />
Figure 1: <strong>MSC</strong> <strong>II</strong> Starter Kit<br />
The <strong>MSC</strong> <strong>II</strong> starter kit is available in two versions:<br />
• <strong>MSC</strong> <strong>II</strong> with Profibus-DP slave<br />
• <strong>MSC</strong> <strong>II</strong> with dual EtherCAT master<br />
It includes everything needed to get started:<br />
• <strong>MSC</strong> <strong>II</strong><br />
• Power supply 24 V 10 A<br />
• License key, green<br />
• QDIO 16/16-0,5<br />
• MACS development environment<br />
• Software maintenance contract<br />
• Crossed Ethernet interface cable, 10 m (10.94 yd)<br />
• CAN bus interface cable, 3 m (3.28 yd)<br />
• 6 Plug-in terminal strips with screw terminals, 18 pole<br />
• 2 Plug-in terminal strip with screw terminals, 9 pole<br />
• 4 Plug-in terminal strips with spring power clamp, 10 pole<br />
The included DIN rail modules <strong>MSC</strong> <strong>II</strong> and QDIO are mounted (together with<br />
the power supply) on a single mounting plate.<br />
A suitable power cord is the only additional item required to facilitate connection<br />
to the power source.<br />
<strong>MSC</strong> <strong>II</strong> Starter Kit<br />
© <strong>Moog</strong> GmbH <strong>User</strong> <strong>Manual</strong> M3000 ® and <strong>MSC</strong> <strong>II</strong> (CA65865-001; Version 1.1, 08/08) 15
Change language