User Manual M3000® Automation System / MSC II (Moog Servo ...
User Manual M3000® Automation System / MSC II (Moog Servo ...
User Manual M3000® Automation System / MSC II (Moog Servo ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 Safety Instructions Typographical Conventions<br />
2 Safety Instructions<br />
This chapter summarizes the most important safety instructions. When handling<br />
the M3000 ® automation system or M3000 ® modules the safety instructions<br />
in the other chapters of this manual must be followed as well as the<br />
safety instructions in the product related hardware and software documentation<br />
required for the specific application.<br />
Following the safety instructions helps to avoid accidents, faults, and<br />
material damage!<br />
2.1 Typographical Conventions<br />
The following symbols and styles are used for identifying the different types of<br />
safety instructions:<br />
DANGER Identifies safety instructions that are intended to warn of<br />
an immediate and impending danger to life and limb or<br />
major property damage.<br />
Failure to observe these safety instructions will lead inevitably<br />
to death, serious personal injury (disablement)<br />
or major property damage!<br />
WARNING Identifies safety instructions that are intended to warn of<br />
potential danger to life and limb or the potential for major<br />
property damage.<br />
Failure to observe these safety instructions might lead<br />
to death, serious personal injury (disablement) or major<br />
property damage!<br />
CAUTION Identifies safety instructions that are intended to warn of<br />
slight personal injury or minor property damage.<br />
Failure to observe these safety instructions might lead to<br />
slight personal injury or minor property damage.<br />
Additional typographical conventions:<br />
�-"12.1-Typographical Conventions" on page 124<br />
2.2 Safety Instructions<br />
2.2.1 Safety Related <strong>System</strong>s<br />
WARNING As with any electronic automation system, the failure of<br />
certain components when using M3000 ® or M3000 ® modules<br />
might lead to an uncontrolled and/ or unpredictable<br />
operational condition. The user should take into consideration<br />
the system level effects of all types of failures<br />
and implement corresponding safety measures.<br />
More on this subject: �-"1.3.1-Safety Related <strong>System</strong>s" on page 2<br />
Safety Instructions:<br />
Typographical<br />
Conventions<br />
Safety Instructions: Safety<br />
Related <strong>System</strong>s<br />
© <strong>Moog</strong> GmbH <strong>User</strong> <strong>Manual</strong> M3000 ® and <strong>MSC</strong> <strong>II</strong> (CA65865-001; Version 1.1, 08/08) 6