User Manual M3000® Automation System / MSC II (Moog Servo ...

11 Product Range Plug-In Terminal Strips
11.8 Plug-In Terminal Strips
Item Designation Remarks Part Number
Plug-in terminal strip with
screw terminals
Plug-in terminal strip with
spring loaded terminals
Labels for plug-in terminal
strips
2 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
8 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
9 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
18 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
2 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
8 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
9 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
18 pole (up to max. 2.5 mm² (14 AWG)
wire cross section)
For labeling plug-in terminal strips
Printed with the numbers 1–108
Includes six labels
Insertion bridge For connecting adjoining terminals of the
plug-in terminal strips
VK055-002
VK055-008
VK055-009
VK055-018
B95907-002
B95907-008
B95907-009
B95907-018
B95885-001
A69102
Coding tab For coding plug-in terminal strips C43145-001
Coding profile For coding plug-in terminal strip connectors
of M3000 ® modules
C43146-001
Spring power clamp 10-pins Spring latch terminal for max 0,5 mm²
wires (20 AWG)
Connector kit for MSD Motion
Controller
2 x FMC 1,5/7-ST-3,5GY
2 x MSTB 2,5/2-ST GY
Mating connectors for the MSD Motion
Controller X3, X9 and X10
Table 34: Product Range – Plug-In Terminal Strips
CA45260-010
CA65115-001
The various DIN rail modules require different numbers of plug-in terminal
strips.
�-"11.8.1-Number of Required Plug-In Terminal Strips" on page 122
Product Range:
Plug-In Terminal Strips
for DIN Rail Modules
© Moog GmbH User Manual M3000 ® and MSC II (CA65865-001; Version 1.1, 08/08) 121