User Manual M3000® Automation System / MSC II (Moog Servo ...

11 Product Range Power Supply for M3000 ® Modules
11.2.3 R-Modules (Remote Modules)
Item Designation Remarks Part Number
RDIO 16/16-0,5 Remote module with digital I/Os and
CANopen interface
(connection over CAN bus)
16-inputs and 16-I/Os
Positive switching
�-"3.3.4-R-Modules (Remote Modules)"
on page 19
D137-002-001
RDISP 22 Display and operating terminal with
TIA/EIA 232 and CANopen interface and
22 keys (connection over CAN bus)
�-"3.3.4-R-Modules (Remote Modules)"
on page 19
D137-004-001
The CPRDISP software (needed
to program and configure the
RDISP) is not included with
RDISP. CPRDISP is available
from Moog as an accessory.
�-"11.5.2-Software for R-Modules"
on page 119
DialogController Displays with TFT technology and touch
screen. Programmable with MACS development
environment. Data exchange
via Ethernet with MSC or MSD Motion
Controller
Display 5.7" D137-004-004
Display 10.4" D137-004-005
Display 12.1" D137-004-006
Table 26: Product Range – R-Modules (Remote Modules)
The plug-in terminal strips, that may be needed for connection of power
and signal cables, are not included in delivery. The plug-in terminal strips
are available from Moog as accessories. Only the MSD Motion
Controller is delivered with the necessary plug-in terminal strips for
power supply and digital I/O.
�-"11.8-Plug-In Terminal Strips" on page 121
11.3 Power Supply for M3000 ® Modules
Item Designation Remarks Part Number
Power supply 24 V 10 A Power-supply for mounting on
DIN top-hat rails
with short-circuit protection
D137-003-001
Input: 230 V AC or 115 V AC
Output: 24 V DC, 10 A max.
Table 27: Product Range – Power Supply for M3000 ® Modules
Product Range:
R-Modules
(Remote Modules)
Product Range:
Power Supply for
M3000 ® Modules
© Moog GmbH User Manual M3000 ® and MSC II (CA65865-001; Version 1.1, 08/08) 117