User Manual M3000® Automation System / MSC II (Moog Servo ...

11 Product Range M3000 ® Modules
11.2.2 Q-Modules
Item Designation Remarks Part Number
QDIO 16/16-0,5 Digital I/O extension module for local
extension of the inputs and outputs of
MSC I, MSC II or RDIO (connection
over E-bus)
16 inputs and 16 I/Os
Positive switching
�-"3.3.3-Q-Modules" on page 17
D137-001-005
QDIO 16/16-0,5N Digital I/O extension module for local
extension of the inputs and outputs of
MSC I or MSC II (connection over
E-bus)
16-inputs and 16-I/Os
Zero switching
�-"3.3.3-Q-Modules" on page 17
QAIO 2/2-AV Analog I/O extension module for local extension
of the inputs and outputs of
MSC I or MSC II (connection over E-bus)
2 inputs (±10 V/ ±10 mA/ 4–20 mA)
2 outputs (±10 V/ ±10 mA/ 4–20 mA/
±50 mA)
�-"3.3.3-Q-Modules" on page 17
QAIO 16/4-V Analog I/O extension module for local
extension of the inputs and outputs of
MSC I or MSC II (connection over
E-bus)
16-voltage inputs (±10 V)
4-voltage outputs (±10 V)
�-"3.3.3-Q-Modules" on page 17
QAIO 16/4-A Analog I/O extension module for local
extension of the inputs and outputs of
MSC I or MSC II (connection over
E-bus)
16-current inputs (0–20 mA)
4-voltage outputs (±10 V)
�-"3.3.3-Q-Modules" on page 17
QEBUS-CAN CAN extension module which can be
used to make available the LocalCAN
bus of an E-bus group for external CAN
bus network stations (over a D-sub front
panel connector)
�-"3.3.3.2-QEBUS-CAN" on page 19
Table 25: Product Range – Q-Modules
D137-001-004
D137-001-011
D137-001-007
D137-001-006
D137-001-010
The plug-in terminal strips, that may be needed for connection of power
and signal cables, are not included in delivery. The plug-in terminal strips
are available from Moog as accessories. Only the MSD Motion
Controller is delivered with the necessary plug-in terminal strips for
power supply and digital I/O.
�-"11.8-Plug-In Terminal Strips" on page 121
Product Range:
Q-Modules
© Moog GmbH User Manual M3000 ® and MSC II (CA65865-001; Version 1.1, 08/08) 116