Configuring AutoSys and CA-7 for Cross-Platform ... - SupportConnect

More documents

Recommendations

Info

Page 8CCI name = A logical name CA-7 Agent may use to insulate itself from the network andany protocols being used. The default is the host name. For the REMOTE statementthat defines the mainframe, the CAICCI name is the value specified by SYSID (xxxx)which by default is defined in the CCIPARM member on the //ENFPARMS DD statementin the ENF proc. The ENF joblog can also be used to determine the SYSID by checkingthe startup options displayed.STARTUP = if specified, the connection is attempted as soon as CAICCI starts. This isrecommended.PORT = specifies the TCP/IP port number to use. The default is 1721, which is thedefault port for Unicenter TNG and CA-7 Agent. This value must match the value definedon the PROTOCOL(TCPIPGW....) statement.ALIAS = is only valid on the LOCAL statement. If the "cciname" is longer than eightcharacters, a one- to eight-character alias must be used to accommodate CAICCI on themainframe. The mainframe will truncate the name to the first 8 characters if an alias isnot provided. This may cause problems if the machines have similar names.RETRY = is only valid on the REMOTE statement. If the connection cannot be made oris broken, CAICCI will retry the connection every n minutes.3) On a Unix machine the asbIII process communicates to the AutoSys, Universal JobManagement agents, and mainframe machines using CCI. You need to configure CCI tocommunicate with a particular machine. For this to work you will not only have to updatethe ccirmtd.prf file you will also have to ensure that the cciccid.prf and thecciclnd.prf files have been created. Following is a breakdown of what these two files arefor:caiccid.prfInstructs the main CAICCI demons what to do and specifies the Max_Recvrs value. Thecaiccid.prf file is found in the following location:$CAIGLBL0000/cci/config//caiccid.prfNodename = Identifies the machine on which the Enterprise Management CAICCIdemons are running. The following is an example of the caiccid.prf file:CLN_Demon = cciclnd startupRMT_Demon = ccirmtd startupMax_Recvrs = 48,32The following parameters specify what the CAICCI demons are to do and specify theMax_Recvrs parameter:CLN_Demon = cciclnd startup - This setting instructs CCI to start the CCI cleandemon when you start CCI.RMT_Demon = ccirmtd startup - This setting instructs CCI to start the CCI remotedemon when you start CCI.Page 8 of 22
Page 9Max_Recvrs = nn, mm - Value of nn defines the number of CCI receivers which alsodetermines the size of the shared memory segment for RVT lists. The value of mm is thenumber of messages that CCI will queue up. These parameter values are explained inthe Shared Memory for RVTs section of the in the Unicenter AutoSys JobManagement for Unix Installation Guide. Note: We do not recommend that youupdate the cciccid.prf configuration file unless the file hits the Max_Recvrs limit.cciclnd.prfDefines the number of seconds to sleep between system scans for communicationsbuffer and connections cleaning. The default time value for cciclnd is one second. Thedefault value should not be changed unless instructed by Computer AssociatesTechnical Support. The cciclnd.pr file is found in the following location:$CAIGLBL0000/cci/config//cciclnd.prfNodename = Identifies the machine on which the CAICCI demons are running.All three of these files are explained in greater detail in the Unicenter AutoSys JobManagement Installation guides for Windows and UNIX.4) CAICCI must be restarted to pick up changes to the CCIRMTD file. To Start/Stop CCI onWindows or Unix you can use the following commandsStart CCI on Windows:If Unicenter is installed: unicntrl start uniIf Unicenter is not installed: ccicntrl startStop CCI on Windows:If Unicenter is installed: unicntrl stop uniIf Unicenter is not installed: ccicntrl stopStart CCI on UNIX:If Unicenter is installed: unistart cciIf Unicenter is not installed: $CAIGLBL0000/cci/scripts/CCISA_rcStop CCI on UNIX:If Unicenter is installed: unishutdown cciIf Unicenter is not installed: $CAIGLBL0000/cci/scripts/CCISA_cshutDefining the Mainframe Host to AutoSys without AutoSys ConnectTo define the mainframe host to AutoSys database you can use jil to add the machine nameand type. From the OS command prompt enter:1) jil2) insert_machine: remote_host - where remote_host is the CCINAME as defined inthe CCIPARM member called by the ENFPARMS DD stmt in the TCPIP gateway procon the mainframe. Further explanation on the mainframe CCI/ENF parameters isdescribed later in this document.3) type: t = “t” implies Unicenter AutoSys Job Management will submit work directly toCA7.Page 9 of 22
Page 1 and 2: Configuring AutoSys and CA-7for Cro
Page 3: Page 3ArchitectureDeciding how the
Page 10 and 11: Page 10To find out what the remote_
Page 12 and 13: Page 12Before you can fully utilize
Page 14 and 15: Page 14CA-7Configuration of Mainfra
Page 16 and 17: Page 16Configuring CA-7 for Bi-Dire
Page 18 and 19: Page 18the XPS SERVER on the target
Page 20 and 21: Page 20We want the job to fail when
Page 22: Page 22High Availability SupportUni

Configuring AutoSys and CA-7 for Cross-Platform ... - SupportConnect

Create successful ePaper yourself

Delete template?

Save as template?