Configuring AutoSys and CA-7 for Cross-Platform ... - SupportConnect
Configuring AutoSys and CA-7 for Cross-Platform ... - SupportConnect Configuring AutoSys and CA-7 for Cross-Platform ... - SupportConnect
Page 22High Availability SupportUnicenter AutoSys Connect 2.4.1 also provides support for a high availabilitysupport for AutoSys to ensure that messages reach their intended destination. This is usedduring a time of failover for when Connect can no longer communicate with the primary EPmachine, it will automatically route queued messages to the shadow machine after the shadowEP has taken over in a failover situation. This process is documented in detail in the AutoSysJob Management Connect Option under the section titled Operations.Page 22 of 22
- Page 1 and 2: Configuring AutoSys and CA-7for Cro
- Page 3: Page 3ArchitectureDeciding how the
- Page 8 and 9: Page 8CCI name = A logical name CA-
- Page 10 and 11: Page 10To find out what the remote_
- Page 12 and 13: Page 12Before you can fully utilize
- Page 14 and 15: Page 14CA-7Configuration of Mainfra
- Page 16 and 17: Page 16Configuring CA-7 for Bi-Dire
- Page 18 and 19: Page 18the XPS SERVER on the target
- Page 20 and 21: Page 20We want the job to fail when
Page 22High Availability SupportUnicenter <strong>AutoSys</strong> Connect 2.4.1 also provides support <strong>for</strong> a high availabilitysupport <strong>for</strong> <strong>AutoSys</strong> to ensure that messages reach their intended destination. This is usedduring a time of failover <strong>for</strong> when Connect can no longer communicate with the primary EPmachine, it will automatically route queued messages to the shadow machine after the shadowEP has taken over in a failover situation. This process is documented in detail in the <strong>AutoSys</strong>Job Management Connect Option under the section titled Operations.Page 22 of 22