GEOTRAC 94 - Lindner Traktoren

Einsatz LandwirtschaftGearboxThe GEOTRAC 94 comes standard with a ZF-STEYR power shift transmission with 16forward and 8 reverse speeds. The duplex powershift with automating function (speed-matching)is standard equipment. This function automaticallyadapts the power shift gear level duringgearshifting. The system also allows manual gearselection.Reverse speedsForward speedsPower shift reverse (Power-Shuttle) can beoperated using the driving direction lever on thesteering wheel or via the optional Multicontroller.The buttons for the standard comfort clutchare located on the gear selector lever. An optionaltravelling PTO shaft is also available. The heavydutyrear PTO shaft offers 4 PTO speeds. TheGEOTRAC 94 delivers roughly 90 horsepowerat its PTO shaft. The PTO shaft starting controlallows jerk-free, low wear and safe transmissionof power. The operator can select from three differentstarting curves (soft, medium, hard). PTOshaft is activated by pressing a button in the cabor on the rear mud guards.HydraulicsThe GEOTRAC 94 is equipped with BOSCH-Rexrothhigh performance hydraulics with separateoil supply and an output of 50 l/min. The2-circuit system is equipped with separate pumpsfor transmission, steering and working hydraulics.For especially demanding jobs, an optional professionalversion with a 70 l/min output isavailable (pump aggregation).The GEOTRAC 94 comes standard with twodouble-acting control units with floating position.These load-sensing control units can besupplemented with up to three control units. Allhydraulic connections are equipped with highquality hydraulic couplings that share a commonleakage oil vessel.