LEDICA ALPHA 7.60.M - Gorgy Timing

LEDICA ALPHA 7.60.M - Gorgy Timing LEDICA ALPHA 7.60.M - Gorgy Timing

gorgy.timing.fr
from gorgy.timing.fr More from this publisher
13.07.2015 Views

LEDICA ® ALPHA 7.60.MIndoor / Single faceITEM CODEN3001 /VERSION Standalone : TCXO quartz radiosynchronizable time baseAccuracy +/- 0.1 sec/24 h (between 0°C and 40°C) 2DCF Radiosynchronization. Antenna + 4m of cable DGPS Antenna + 10m of cable G24V reversed parallel minute pulses receiver clock 3Minute 60V receiver • VSerial reversed 1/2 minute pulses receiver clockConsumption 1.25V. 60 to 120mA. 39 ohms shunt• 5AFNOR NFS 87500* receiver clock 8SMPTE-EBU receiver clock • 7ASCII RS 232 receiver clock BASCII 422/485 receiver clock QDHW 869.525 Mhz Synchronization LNTP Ethernet 10/100 base T Synchronization NWi-Fi(IEEE 802.11B/G standard) • W*IRIG.B Version: to be specified as « remark » on your Purchase Order.CONFIGURABLE LEDConfigurable colour : red, yellow, green 1Configurable colour : white or blue 5MOUNTINGStandard : wall mount** 1Flush mount 3** Please refer to the brackets technical sheetCOLOUR OF CASEStandard : anodized aluminium 7Black painted aluminium • 0Specific -POWER SUPPLYStandard : 230VAC/50-60Hz 0115VAC/50-60Hz 1Power Over Ethernet (POE) 7Low voltage power supply : 12 VDC 2Low voltage power supply : 24 VDC 4Low voltage power supply : 48 VDC 6OPTIONSTimer : touch housing control block (flush and wall mount version)+ 4 meters of cable - up/down ITimer case + 15 m of cable CTemperature probe(accuracy ± 0.5°C) + 5 m cable : temperature andhour displayed alternately TTime beep output, or contact relays for end of timer EASCII RS232 output(do not associate with Ascii input version) Aor : ASCII RS422-485 output(do not associate with Ascii input version) RTropicalized USpecification DRef : BDR_UK3-8_LEDI-Calendar-V3.0-priceless2 All technical changes, aesthetic, colour can be made without prior notice.

<strong>LEDICA</strong> ® <strong>ALPHA</strong> <strong>7.60.M</strong>Indoor / Single faceITEM CODEN3001 /VERSION Standalone : TCXO quartz radiosynchronizable time baseAccuracy +/- 0.1 sec/24 h (between 0°C and 40°C) 2DCF Radiosynchronization. Antenna + 4m of cable DGPS Antenna + 10m of cable G24V reversed parallel minute pulses receiver clock 3Minute 60V receiver • VSerial reversed 1/2 minute pulses receiver clockConsumption 1.25V. 60 to 120mA. 39 ohms shunt• 5AFNOR NFS 87500* receiver clock 8SMPTE-EBU receiver clock • 7ASCII RS 232 receiver clock BASCII 422/485 receiver clock QDHW 869.525 Mhz Synchronization LNTP Ethernet 10/100 base T Synchronization NWi-Fi(IEEE 802.11B/G standard) • W*IRIG.B Version: to be specified as « remark » on your Purchase Order.CONFIGURABLE LEDConfigurable colour : red, yellow, green 1Configurable colour : white or blue 5MOUNTINGStandard : wall mount** 1Flush mount 3** Please refer to the brackets technical sheetCOLOUR OF CASEStandard : anodized aluminium 7Black painted aluminium • 0Specific -POWER SUPPLYStandard : 230VAC/50-60Hz 0115VAC/50-60Hz 1Power Over Ethernet (POE) 7Low voltage power supply : 12 VDC 2Low voltage power supply : 24 VDC 4Low voltage power supply : 48 VDC 6OPTIONSTimer : touch housing control block (flush and wall mount version)+ 4 meters of cable - up/down ITimer case + 15 m of cable CTemperature probe(accuracy ± 0.5°C) + 5 m cable : temperature andhour displayed alternately TTime beep output, or contact relays for end of timer EASCII RS232 output(do not associate with Ascii input version) Aor : ASCII RS422-485 output(do not associate with Ascii input version) RTropicalized USpecification DRef : BDR_UK3-8_LEDI-Calendar-V3.0-priceless2 All technical changes, aesthetic, colour can be made without prior notice.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!