SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite

More documents

Recommendations

Info

APPENDIX - COPTIONAL ACCESSORIES- QA-Master ® Software Package ..............................................1255-00- Battery Pack Assembly........................................................ MA58-05- SP78-200 Bar Code Reader................................................. SP78-200- Portable Thermal Printer (115VAC) ......................................418-113- Portable Thermal Printer (230VAC) ...................................418X-113- Wrist Strap............................................................................. SP68-99- Interconnect cable for Macintosh ® computerswith 8 pin mini-DIN connector ................................................418-79- Modular Interconnect Cable (requires adaptor below) .......SE108-69- DB25P DCE (Null Modem) Interface Adaptor .......................418-70- DB25S DCE (Null Modem) Interface Adaptor ......................418-71- DB25P DTE (Normal) Interface Adaptor ...............................418-80- DB25S DTE (Normal) Interface Adaptor ...............................418-81- DB9P Interface Adaptor ..........................................................418-90- DB9S Interface Adaptor ..........................................................418-91- <strong>Spectrophotometer</strong> Stand....................................................... SP68-80Item to be measured.The unit quicklyattaches to the fixturewith a thumb screwadjustment.Spring loaded holdingclamp.Holds unit closed.C-1
APPENDIX - DCOLOR CHECKThe color check procedure will help you track instrument colorperformance to assure measurement accuracy. Initially, the three patches onthe standard should be measured once a day for a period of 10 days todetermine the reference values. Thereafter, a periodic check (once a weekdepending on usage) is all that is required.Located on the back of the reference standard envelope is a color checklabel. The reference data should be recorded there for quick reference.Reference Data ProcedureTo obtain reference values:1) Clean instrument optics and reference standard if necessary.2) Calibrate instrument according to procedure in operation manual. Note:The reference standard is dramatically affected by smudge marks anddust; and must be kept clean.3) Select L*a*b* absolute function and desired illuminant/observer. Note:The selected illum/obs must be the same whenever the color check isperformed.4) Measure the White (1), Blue (2), and Brown (3) patches on thereference standard.White Blue Brown5) Record the L*a*b* values for each color on a piece of paper.6) Repeat steps 1-5 for 10 days.D-1➩
Page 2 and 3:
WARNING: Shielded interface cables
Page 4 and 5:
Dear Customer:Congratulations! We a
Page 8 and 9:
Table of Contents . . . continued7.
Page 10 and 11:
User InterfaceThis information will
Page 12 and 13:
What To Do First . . . continuedApp
Page 14 and 15:
Packaging Illustration1-2
Page 16 and 17:
1.3 Installing the Battery PackThe
Page 18 and 19:
1.5 Charging the Battery Pack‘‘
Page 20 and 21:
1.6 Menu Page SelectionThe main men
Page 22 and 23:
SECTION 2INSTRUMENT POSITIONING &ME
Page 24:
Instrument Positioning & Measuremen
Page 27 and 28:
Positioning the Instrument on the W
Page 29 and 30:
3.3 Calibration ProcedureTo perform
Page 31 and 32:
Calibration Procedure . . . continu
Page 33 and 34:
4.2 Illuminant/Observer SelectionTh
Page 35 and 36:
Reference Entry . . . continued5) M
Page 37 and 38: Sample Measurement . . . continued4
Page 39 and 40: Using Measurement Averaging . . . c
Page 41 and 42: Adjusting Tolerance Values . . . co
Page 43 and 44: Adjusting Tolerance Values . . . co
Page 45 and 46: 5.2 Pass/Fail MeasurementThe Pass/F
Page 47 and 48: SECTION 6STORAGE OPERATIONSubjects
Page 49 and 50: Storing Measurements . . . continue
Page 51 and 52: Deleting Stored Measurements . . .
Page 53 and 54: 6.3 Printing Stored MeasurementsThe
Page 55 and 56: Printing Stored Measurements . . .
Page 57 and 58: Tagging and Storing Operation . . .
Page 59 and 60: Tagging and Storing Operation . . .
Page 61 and 62: 6.5 QA-Master ‘‘Run Job’’ O
Page 63 and 64: Setting RS-232 Communication Option
Page 65 and 66: 7.2 Setting Operation OptionsThere
Page 67 and 68: Setting Operation Options . . . con
Page 69 and 70: Setting Operation Options . . . con
Page 71 and 72: Setting Printout Options . . . cont
Page 73 and 74: 7.4 Setting Date And TimeThe date a
Page 75 and 76: 8.2 Cleaning the OpticsThe optics s
Page 77 and 78: 8.4 Replacing the Target Window☛
Page 79 and 80: 8.6 Troubleshooting TipsInstrument
Page 81 and 82: 9.2 Scanning a Bar CodeFollow these
Page 83 and 84: Troubleshooting . . . continuedWas
Page 85 and 86: Technical Specifications . . . cont
Page 87: Display Messages . . . continuedCal
Page 91 and 92: COLOR CHECK RECORDDate: Illuminant:
show all

SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?