SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite
SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite
SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9.2 Scanning a Bar CodeFollow these guidelines for successful bar code scanning.1) Turn on the X-<strong>Rite</strong>instrument. Be sure theinstrument is in theStorage mode.2) Hold the BCR in your handas you would a pencil. TheBCR works best when tiltedfrom 10° to 30°, althoughany angle from 5° to 45°will work. See Figure 2.(10° - 30°)Optimum<strong>Operating</strong>Angle(5° - 45°)<strong>Operating</strong>AngleFigure 23) Place the tip of the BCR onthe white space to the left orright of the bar code. Dragthe BCR smoothly andlightly across the bar code.Do not lift the tip of theBCR from the surface of thebar code. See Figure 3.4) The instrument will displaythe title of the bar code ifthe scan was successful. Ifthe display appears blank tryscanning the bar code again.If after several scanningattempts the display stillappears blank, see Section9.3, Troubleshooting.Figure 39-2
Change language