SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite

Setting Operation Options . . . continued3) Press the [↓] key #3 or [↑] key #4to select Operation Options, thenpress [yes] key #2.CHANGE OPTIONS FOR:OPERATION?exit yes selectKey#1 Key#2 Key#3 Key#4PressPress or Press☛ On certain options the [↓] key #2 will page down through the available settings, while the [↑] key #3 willpage up through the available settings.4) Select the number of samplesaveraged (1 - 16) or AutoAveraging. Press [↓] key #2 todecrease and [↑] key #3 toincrease averaging number- Press [next] key #4 to advance tothe next option.5) Select Auto Reference option.Press [on] key #2 to ‘‘ENABLE’’ or[off] key #3 to ‘‘DISABLE.’’- Press [next] key #4 to advance tothe next option.6) Select the number of referencelocations required (1 - 200). Pressthe [↓] key #2 to decrement and the[↑] key #3 to increment.- Press [next] key #4 to advance tothe next option.AVERAGING MODE =1 SAMPLE AVERAGEDexit select nextKey#1 Key#2 Key#3 Key#4Decrease IncreaseAUTO REFERENCE =ENABLEDexit on off nextKey#1 Key#2 Key#3 Key#4on2Coff10D75REFERENCE LIMIT =50 REFERENCESexit select nextKey#1 Key#2 Key#3 Key#4DecrementIncrementContinued7-6➩