SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite

6.3 Printing Stored MeasurementsThe SP88/SP98 has the ability to output stored measurement data directlyto a serial printer or a computer. The format that data gets printed in iscontrolled by the Printout Options select in Section 7.3.The measurement data that is printed depends on what Storage Optionis selected in Operation Options (Section 7.2).To print stored measurements:1) Refer to Section 7 to set RS-232 and Printout Options, if required.2) In storage mode, press [edit] key#4 to enter ‘‘SELECT EDITOPTION’’ screen.DATA GROUP 1STORED: 6STORES REMAINING: 993menu view next editKey#1 Key#2 Key#3 Key#43) Press [print] key #3 to enter‘‘SELECT PRINT MODE’’ screen.SELECT EDIT OPTIONexitdelprintKey#1 Key#2 Key#3 Key#4There are three modes of printthat can be accessed during storeddata printout.Print Last - will print the data ofthe last measurement taken inthe selected group.Print Group - will print allmeasurements that arecurrently in the selected group.The group printout function willalso printout the "Group #" foreach group that has data.Print All - all measurementsthat are stored will be printed.6-7exitSELECTPRINT MODEallgrouplastKey#1 Key#2 Key#3 Key#4SeePrint All SeePrint GroupSeePrint Last➩