SP88/SP98 Spectrophotometer Operating Manual ... - X-Rite

SECTION 6STORAGE OPERATIONSubjects covered in Section 6:6.1 Storing Measurements6.2 Deleting Stored Measurements6.3 Printing Stored Measurements6.4 Tagging and Storing Operation (with optional BCR)6.5 QA-Master ‘‘Run Job’’ OperationStorage operation allows measurement data to be stored, deleted andoutput to a computer or printer.When the SP88/SP98 is used in conjunction with X-Rite’s QA-Master ®software program, stored measurement data is ‘‘uploaded’’ directly intothe application for visual analysis.Data that is displayed during storage operation depends on whatstorage method is selected in Operation Options (Section 7.2). If ‘‘StoreData Only’’ is selected, the data displayed will be based on the last colorspace selected in normal operation. If ‘‘Store with Pass/Fail’’ is set, thedisplayed data is based on the closest pass/fail reference.6.1 Storing MeasurementsStorage allows sample measurements to be assigned to group numbers.Once in storage mode, the operator can randomly select group numbers andmeasure as many samples as desired in the selected group. The instrumentallows a maximum of 999 samples to be stored in 20 groups.Stored sample measurements can also have scanned tags attached byuse of the ‘‘optional’’ bar code reader (BCR). Group names are assignedby scanning tags. Individual measurements can have up to 6 tagsattached. Refer to Section 6.1 for additional information on BCR tagging.6-1➩