TRAIL CHARGER BASED CHARGING SOLUTIONS - Maxon

More documents

Recommendations

Info

TC9-KITTrail Charger with ABS lock-out protection and Extender module(dual pole or seven-way aux pin circuit powered)Kit Content• 20 AMP TRAIL CHARGER WITH LOCK-OUT FEATURE• DUAL POLE NOSE BOX• TRAIL CHARGER HARNESS• EXTENDER MODULE WITH HARNESS• TRAIL CHARGER COVER• HARDWARE KITDescription:Trail Charger with lock-outs that has anelectronically controlled relay switch that willconnect to either the 7-way auxiliary circuit or dualpole source for re-charging the liftgate batteries.The Extender module allows the Trail Charger tohave extended run time when the tractor is turnedoff and provides low voltage protection for thetractor’s primary batteries.ControlModuleDual Polew/BackupSingle Pole orDual PoleSingle Pole orDual PoleRecommended for:Special Applications that demand highestflexibility such as a trailer fleet for lease.Operation:Li gate MotorBa eriesTrail Chargerw/Lock out7-WayTrailer – Lease7-Way Cord7-WayBa eriesThe TC9-KIT is designed to allow the maximum flexibility for trailer fleets that are equipped with liftgates. By utilizing the Dual Pole with theAux pin circuit as backup, there are now two power source options to re-charge the liftgate batteries from the tractor. The preferred optionis to use a dual pole stinger cord. Whenever a dual pole stinger cord is connected, a yellow LED light will illuminate on the dual pole nosebox indicating the system is operational and that power is being directed to the liftgate batteries. If the tractor is not equipped with a dualpole stinger cord, or the stinger cord is not functioning properly, the 7-way auxiliary circuit will be used as the power source. When powerfrom the aux circuit is available a green LED light will illuminate on the dual pole nose box. In this charging mode a control module willautomatically turn off the Trail Charger when the brakes are applied (ABS lock-out protection).6 | TC9-KIT
TC4-KITTrail Charger (Permalogic Selector powered)Kit Content• 20 AMP TRAIL CHARGER• SELECTOR NOSE BOX• TRAIL CHARGER HARNESS• SELECTOR TRAIL CHARGER HARNESS• TRAIL CHARGER COVER• HARDWARE KITDescription:The Permalogic Selector chooses its power source from either the tractor (dual pole) or the reefer alternator/battery.Recommended for:Severe-duty liftgate application on reefer trailers.Operation:The Permalogic Selector was designed to increase charging time to the liftgate batteries by beingable to power the Trail Charger by either the tractor charging system or the reefer charging system.With having two power sources to select from, the amount of charging time for the liftgate batteriesis increased. The tractor is theprimary source of power as long asthe tractor’s batteries are above 13.2volts. If the tractor’s batteries are notabove 13.2 volts, or the tractor is notconnected, the Permalogic Selector willuse the reefer unit as the power sourceas long as the reefer’s battery voltageis above 12.9 volts.AlternatorBa eriesLi gate MotorBa eriesTrail ChargerPermalogicSelectorDual PoleDual PoleBa eriesTrailer – Reefer7 | TC4-KIT
Page 2 and 3: The Challenge - Keeping Auxiliary L
Page 4 and 5: TC6-KITTrail Charger with ABS lock-
Page 6 and 7: TC7-KITTrail Charger with Extender
Page 10 and 11: TC10-KITTrail Charger with Extender
Page 12: MAXON LIFT CORP.11921 Slauson Avenu

TRAIL CHARGER BASED CHARGING SOLUTIONS - Maxon

Create successful ePaper yourself

Delete template?

Save as template?