Manual - LP2824 - logmaster

MaintenanceCleaningWhen you clean the printer, use one or more of the following supplies thatbest suits your needs:DESCRIPTIONCleaning pens (12)Cleaning swabs (25)Cleaning cards, 2-in wide (25)Save-a-Print Head film, 2-in wide (3)The cleaning process takes just a couple of minutes using the steps outlinedbelow.Printer Part Method IntervalPrint headPlaten rollerPeel barTear barExteriorInteriorCutterLet the print head to cool for one minute, then use a newcleaning pen to swab the print elements (the thin grayline on the print head) from end to end. NOTE: You donot have to turn off the printer to do this.If print quality remains poor after cleaning, try theSave-a-Print Head cleaning film to remove buildupwithout damaging the print head. Call your authorizedreseller for more information.Manually rotate the platen roller. Clean it thoroughlywith 70% isopropyl alcohol and a cleaning swab,cleaning card, or lint-free cloth.Clean it thoroughly with 70% isopropyl alcohol and acotton swab.Water-dampened clothBrush or air blowUse tweezers to remove scrapsAsnecessaryor afterevery fiverolls ofmediaAs needed980481-001A 25