Daytime Fan-Aspirated Radiation Shield Kit Installation Manual
Daytime Fan-Aspirated Radiation Shield Kit Installation Manual
Daytime Fan-Aspirated Radiation Shield Kit Installation Manual
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installing the <strong>Daytime</strong> <strong>Fan</strong> <strong>Kit</strong>8. Attach the three threaded spacers to the fan plate using the three #8-32 x1/2'' screws and the three #8 washers and #8 lock washers included withthe kit.ThreadedSpacer(3)<strong>Fan</strong> Plate#8 Flat Washer#8 Split-Lock Washer#8-32 x 1/2" ScrewInstall Threaded Spacers9. Detach the fan motor cable from the power cable assembly on the fan plateand set the fan motor aside.<strong>Fan</strong> MotorAssembly<strong>Fan</strong> Plate<strong>Fan</strong> PlugPower CableAssemblyDetach <strong>Fan</strong> Motor Cable10. Lower the <strong>Fan</strong> Plate onto the radiation shielding stack.9
Change language