DMAK-0021 Airvisor MV REF. 1001645 - Arco

DMAK-0021 Airvisor MV REF. 1001645GENERAL DATADivision : Head ProtectionFamily : Respiratory ProtectionRange : Supplied Air RespiratorsLine : Loose fitting visorsBrand formerly known as : WILLSONBusiness CountriesEMEAUnited KingdomMiddle EastActivity Domains :Automotive and Part Manufacturer • Aviation • ChemicalIndustries • Foundry • Industrial Cleaning • Iron andsteel industry • Medical and Pharmaceutical • Metal steel• Utilities • Wood Industries • Laboratory • Ship Building• IndustryProduct Use :For use in paint spray operations, e.g. automotive (especially isocyanate paints), furniture etc., also for use in the generalchemical industry.Specifically for use where the operator must (or prefers to) use a single air hose to supply both the respirator and thespraygun.In this case the waistbelt/regulator unit ensures that the flow of air to the visor is consistent, irrespective of the air beingdrawn off by the triggering of the spraygun. Therefore ensuring that sufficient air reaches the user.PRODUCT ADVANTAGESFeature :The waistbelt contains a speacial rolling diaphragm regulator which controls the flow of air at a constant rate, independent ofvariations in factory airline supply pressure.Benefit :Airflow is maintained above 180 l/min for maximum comfort, security and safety.Feature :The waistbelt contains a carbon filter element which removes any odours from the air which is delivered to the user.Benefit :Comfort and pleasure in use.Feature :In this system the waistbelt is specially adapted with a quick release auxiliary outlet. A spraygun hose is supplied whichmakes it highly suitable for use in the automotive industry.Benefit :Single supply line operation offers stability of flow to the visor even when paint spraying (operation of the spraygun). Onlyone hose on the ground behind the user so less risk of trips and falls. Greater overall safety.

Feature :Lightweight headpiece with a wide field of vision, supplied with an acetate visor (EN166 3-F) specially designed for use inchemical and spray paint areas.Benefit :Maximum usability and safety with minimum fatigue. Visor does not easily degrade in use, vision and strength are notimpaired, low running costs.Feature :Separate visor and face seal units. Each can be changed independently of the other.Benefit :Complete flexibility in use with lower running costs.Feature :Disposable visor covers are used to protect the main visor.Benefit :Longer service life and the maintenance of accurate vision. Lower overall running costs.TECHNICAL DESCRIPTIONMaskHead piece :VisorMaterial :Main shell components - PolyprolyleneFace Seal - Non-woven polypropyleneVisor Screen:Chemical resistantVisor/Screen Material :Cellulose acetateVisor/Covers :Polyester (anti-static coating)Head and Neck Cover :Non-woven polypropyleneAir Diffuser :Open cell foamSupplied Air Tool :Waistbelt prepared and spraygun hose supplied. Tool added at user's discretion, depending on his needs.BeltBelt or Harness :WaistbeltMaterial :Woven PolyesterHoseHose :Food grade PVC material, complete with High Flow Quick Release connectorsLength Hose :Selection from 3.5m to 30mCompressed Airline Infiltration SystemWall Model :Selection from rangeFloor Model :Selection from rangeFilter :See dedicated data sheet for details of replacement parts

EC CONFORMITY DECLARATIONThe manufacturer or its legal representative supplier settled in the European Community:Sperian Protection EuropeDeclares that the next Personal Protective Equipment described here after is in conformity with the provisions ofCouncil Directive 89/686/CEE:Designation: DMAK-0021 Airvisor MVReference: 1001645Standard(s): TM 14/7.25This PPE is the object of the above EC attestation type:EC438Delivered by:INSPEC56 Leslie Hough WaySalfordM6 6AJ Greater ManchesterUnited KingdomMade at Roissy, on the 07/09/2007By:Division: Head Protection