Contents

ISewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150Mechanical AccessoriesStationary wet sump installationSTS 80/100, TP 80/10054321For STC 80/100see dimension drawing of pumpTP 15054367Item 1aAHItem 1bItem 1a501263BLGHKMJ316346340COPDIN210EØ FWilo-Drain STC 80/100, STS 80/100, TP 80-150Mechanical AccessoriesSTS, TP: Base elbow (Item 1a)Made of cast iron 25 (EN-GJL-250) includingpump support, profile seal, accessories for mountingand fastening to the ground, and guide pipebracket, cast iron 25 (EN-GJL-250), flanges PN 10/16 to DIN 2501 for DN 80/100.Guide pipe (2 x 1.5") must be provided onsiteSTS/TP 80 STS/TP 100A 300 400B 303.4 339C 180 225D 105 110E 110 130F Ø 40 Ø 48G 225 250H 210.5 238I 118.5 132or Item 1bStainless steel pump support, profile seal, accessoriesfor installation and fastening to the ground,and stainless steel cable guide 10 m for 5 m installationdepth, flanges PN 10/16, to DIN 2501Made of stainless steel, as for item 1a, but withstainless steel cable guide for 5 m installationdepth.TP 80 TP 100/150H 180 240I 345 385J 185 215K 217 350L 232 250M 211 246N 95 95O 182 182P 109 129Stainless steel pump support, profile seal, accessoriesfor installation and fastening to the ground,and stainless steel cable guide 10 m for 5 m installationdepth, flanges PN 10/16, to DIN 2501.Submersible pumps6290182942Item 1b24021538,5095182Made of cast iron 25 (EN-GJL-250), includingpump support, profile seal, and accessories forinstallation and fastening to the ground. The doublepipe guide (R 2) must be provided on-site.1350129246250As of: 06/2004 - Subject to change without prior notice91