Contents

Hot WaterWilo-Drain TMT/TMC, VCProduct DescriptionWilo-Drain TMT/TMCSubmersible wastewater pumpsType keyExample: Wilo-Drain TMC 30-0.5TM Submersible pumpT For hot domestic wastewater up to 95 °CC For industrial wastewater up to 95 °C30 Nominal diameter of delivery connection (DN 32)-0.5 Rated motor power [kW]ApplicationsSpecially constructed submersible pump for municipal and domesticuse to handle e.g. condensate, hot water and aggressive media.DesignOil-immersed, leak-proof encapsulated, noiseless three-phasesquirrel-cage motor, free of radio frequency interference. A faultcurrent safety switch (mandatory for outdoor installations) for abreaking current of 30 mA must be fitted by the customer, in accordancewith EN 60335-2, 41.Scope of deliveryPump with permanently connected supply line with bare cable endand installation and operating manual. (Motor protection onsite byothers).Hot WaterWilo-Drain TMT/TMC, VCProduct DescriptionWilo-Drain VCVertical wastewater pumpType keyExample: Wilo-Drain VC 32/10VC Vertical wastewater pump32 Nominal diameter of discharge port [mm]/10 Max. delivery head [m]ApplicationsWilo-Drain VC pumps are ideal for conveying wastewater that containssolid matter with a maximum diameter of 5 mm or 7 mm(VC 40). They have been specifically designed for conveying mediaup to 100 °C (e.g. condensate, pump sumps of boiler plants, basementsat risk of flooding).Suitable for installation:– On completely level ground– With shaft always vertical– VC 40 suspended from flangeDesignFloat switchVC 32: Built into motorVC 40: Separated from motorElectrical dataVC 32: 1~230 V with 40 µF capacitorVC 40: 3~230/400 V motor protection switch required on site.Scope of deliveryPump with attached float switch and installation and operatingmanual.48 As of: 06/2004 - Subject to change without prior notice