Contents

Wastewater/DrainageWilo-Drain TP 50, TP 65Mechanical AccessoriesStationary wet sump installation TP 50 and 65154362BCADMechanical AccessoriesBase elbow incl. cable guide (Item 1)Made of cast iron 25 (EN-GJL-250), including pumpsupport, profile seal, accessories for installation andfastening to the ground, and guide pipe bracket.Complete 7 m cable guide for 3.5 m installationdepth.For connection DN 50 or DN 65. Alternatively, onsiteinstallation with 1" guide pipe possible (scopeof delivery including chain, Item 6).TP 50 TP 65A 150 180B 300 360C 150 200D 242 280Chain (Item 6)Made of galvanised steel, including stainless steelshackles, length: 5m, lifting capacity: 250 kg(included in scope of delivery of Item 1)1Check valve body (Item 2a)Rp 2-female thread, cast iron 25 (EN-GJL-250)For TP 50 only1ECheck valve body (Item 2)DN 50, cast iron 25 (EN-GJL-250), flangesPN 10/16, with unrestricted passage, cleaning portand ventilation device including installation accessories,draw. No. 53.4-309FTP 50 TP 65E 203 223F 200 240Gate valve (Item 3a)Rp 2 female thread, brass, nickel-platedFor TP 50 onlyGate valve (Item 3)DN 50, cast iron 25, (EN-GJL-250) flangesPN 10/16, incl. installation accessoriesGHKJ ITP 50 TP 65G 235 295H 150 170Y-pieceMade of galvanised steel 37, with 2 sets of installationaccessories, flanges PN 10/16, DIN 2501,DN 50/50/50 or 65/65/65TP 50 TP 65I 123 143J 123 143K 308 385165Pipe bend (Item 4)DIN 28637, nodular graphite iron(EN-GJS-400-15), with 1 set of installationaccessories for a flange connection. FlangesPN 10/16, to DIN 2501, DN 65 for TP 65 only165Installation accessories (Item 5)For a flange to flange connection, with 4 screws andnuts and 1 flat seal. Flanges PN 10/16, to DIN 2501,DN 65 for TP 65 only46 As of: 06/2004 - Subject to change without prior notice