Contents

Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FHProduct DescriptionWilo-DrainLift TMPWastewater lifting plant (above-floor installation)Type keyExample: Wilo-TMP 32- 0.5 EMTMP Wastewater lifting plant (above-floor)32 Nominal diameter of delivery connection(DN 32 / G 1 1 / 4 )– 0.5 Rated motor power [kW]EM AC 1~230 V, 50 HzApplicationsWastewater lifting plant for the automatic drainage of showers,washstands, washing machines, dishwashers etc. in old or new buildingswhere wastewater cannot be fed to the main sewers by naturalgravity flow or disposal of wastewater from below the backflow level.Suitable for handling drainage water that is free of faecal and fibrousmatter, non-aggressive rainwater, wastewater and drainage waterthat is free of fats and oils. The specifications of DIN EN 12050-2 andDIN 1986-100 must be complied with.Note:Handling of sewage that contains faeces in wastewater lifting plantsis not permitted. For these applications, we recommend using theWilo-DrainLift S-XXL series sewage lifting plants.DesignFully assembled, automatically switching wastewater lifting plantwith all required switching and control equipment and built-in nonreturnvalve.TMP 32:Active carbon filter with overflow protection for air intake andexhaust, 2 inlet ports DN 40 at different height levels, discharge portDN 40 (G 1 1 / 4 ). The ventilation can also be guided to above roof levelwith a self-sealing connecting sleeve (pipe outer diameter 25 mm).TMP 40:Flexibility for use with inlets possible both on the side and on the top(a particular advantage for retrofitted installations), easy-to-maintainsystem construction with built-in TMW 32, DN 40 dischargeport.Wilo-DrainLift BoxSubmersible wastewater plantType keyExample: Wilo-DrainLift Box 32/8Box Wastewater lifting plant32 Nominal diameter of delivery connection(DN32, Ø 40)8 Max. delivery head [m]ApplicationsDrainage of flood-endangered rooms, garage entrances and basementsand basement hatchways as well as showers, washbasins etc.in old and new buildings fur sub-floor installation.DesignAutomatically switching lifting plant with built-in submersible pump.Ready-to-install for sub-floor applications. Flexibility for use withthree inlet options in DN 100, of which one inlet can be used for connectionto another tank.Scope of deliveryFully installed and assembled pump with attached float switch in animpact-proof plastic container for sub-floor installation. Completelyready-to-operate with installed pressure line and non-return valve.Pump cable (5 m or 10 m long) with attached Schuko plug. Installationand operating manual.Wilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FHProduct DescriptionScope of deliveryFully assembled, automatically switching wastewater lifting plantwith active carbon filter (for TMP 32) and installation and operatingmanual.112 As of: 06/2004 - Subject to change without prior notice