HFS-03 Lock Standard - saf-holland

HFS-03 – SAF-HOLLAND Lock Standard Page 2 of 35Rev. K (6/11)Lock Standard Revision HistorySECTION REV. DATE REVISIONAll 2/01 A - Initial release3.3.1.66.3.1.5Appendix AAppendix BAppendix AAppendix BAppendix CSection 7.3Appendix H2/0310/037/0512/059/06Appendix B 1/07Appendix A & BAll12/071.0 Scope 12/19/07Appendix I 8/084.2.1Appendix B & C6/11B – Revised wording as necessary to reflect changedcompany structure. (Holland Hitch to Holland Group)C – Added data for new locks: XE-10486, XE-10487D – Revised section 3.3.1.6 and 6.3.1.5 to read: “Allinspectors/operators shall be qualified to Level I, SNT-TC-1A or MIL-STD-410 minimum or CGSB 48.971-2000. Also,“All evaluations of nonconformances shall be done byqualified Level II or Level III personnel.” Added definition ofQualified Non-Destructive Testing Personnel to 1.5E – Added part numbers to Appendix A and revisedAppendix B to add MPI acceptance criteria for the XA-10853-1 and XA-10853-SP locksets. Added part numberlabels to drawings in Appendix B.F – Added XA-10486-E part number to Appendix A. AddedMPI acceptance criteria for the XA-10486-E lock toAppendix B. Removed grain flow requirement for XE-10486in Appendix C. Updated grain flow requirement for XE-10487 in Appendix C to match print.Section 7.3 – Changed method of showing inspectionapprovalApp. H - Revised to show stamp in current useG – Added additional Magnetic Particle Inspectionacceptance criteria for XA-10853-1 and XA-10853-SP(page 20) in Appendix B.H – Added XA-4109939 to Appendix A; changed pictureson Appendix B.Revised to reflect new logo and company name.I – Revised Scope to identify locks as “safety critical items”and this Standard as the control document.J – Added new Appendix I showing Magnetic ParticleTechnique sheetK – Removed XE-10486 part number from 4.2.1 (Rev F).Added Visual Acceptance Criteria to Appendix B. Updatedgrain flow image for XE-10487 in Appendix C to match print.