Operating Instructions 150 000 019 00 EN

More documents

Recommendations

Info

1. IntroductionThe KRONE rotary tedder is equipped with all necessary safety features (protective devices). Not all danger pointson this machine can be completely secured with regard to the preserving of the function of the machine. Themachine bears appropriate warning labels to point out these residual dangers.We have designed these danger notices in the form of so-called warning symbols. This chapter contains importantinformation on the position of these warning labels and their meaning/explanation!Make sure that you are fully conversant with the meaning of the warning symbols opposite.The text next to the symbols and the position of the signs on the machine give informationabout the specific danger points on the machine.1.1 Position of the warning signs, with safety-technical information, on the machine35334 3 6 2 1 6 4re + liKZW-1-0016
1Do not exceed themaximum permittedPTO shaft speed!Order No. 939 100-4 (1x)939 100-4MAX. 540/minMAX. 200 bar2Read and take note of theoperating manual.Order No. 939 471-1 (1x)34Danger from self-turning swather disk arms.Maintain safe distance!Order No. 939 472-2 (4x)No personnel allowed inside swivel space ofthe operating equipment while the deploymentarms are being folded down.Order No. 939 469-1 (2x)56Accumulator is under gas and oil pressure.Repairs can be carried out only in connectionwith replacement of the complete unit.Order No. 939 529-0 (1x)Never reach into thedanger zone between thethree-point frame and thecarrier bar of the rotarytedder while any partslocated there can stillmove by themselves.Order No. 942 196-1 (2x)7
Page 1 and 2: Rotary tedderKW 5.50 / 4 x 7KW 6.70
Page 3 and 4: I. ForewordDear customer,Ordering R
Page 5 and 6: III. General1. Operation in Accorda
Page 7: 5. Hydraulic System1. The hydraulic
Page 11 and 12: 1440 135-3 (1x) bei KW 5.50939 429-
Page 13 and 14: 2. Preparations for use2.1. Special
Page 15 and 16: PTO shaftAfter the rotary tedder ha
Page 17 and 18: 2.4 Adjusting the PTO shaft length
Page 19 and 20: 2.7 Conversion from working totrans
Page 21 and 22: Switch off the engine and remove th
Page 23 and 24: 3.3 Drive rpmsWide spreading (teddi
Page 25 and 26: 3.7 Tine adjustmentThe tines (3) mu
Page 27 and 28: 4.3 HydraulicsThe rotary tedder has
Page 29 and 30: Lubrication points on the KW 6.70 /
Page 31 and 32: 5. Winter storage5.1 Safety instruc
Page 33 and 34: 7. Special accessories7.1 Night swa
Page 35 and 36: 7.3 Wheel guards• For all service
Page 37: 7.4 Fixed lightingA permanently fix
Page 40 and 41: 1. Special safety instructions• P
Page 42 and 43: 4. Mounting the disc arms to the di
Page 44 and 45: Bolt the front protective frame (2)
Page 46 and 47: 5.3 Mounting of the protective fram
Page 48: KW 6.70/6, KW 7.70/6x7 and KW 8.80/

Operating Instructions 150 000 019 00 EN

Create successful ePaper yourself

Delete template?

Save as template?