Operating Instructions 150 000 019 00 EN

4. Mounting the disc arms to the discplatesThe disc arms that are fitted with thetines must be mounted in accordancewith the direction of rotation. Take noteof the stickers on the rotary tedder.• Beige tines = anti-clockwise disc• Green tines = clockwise discFix the tine arms (2) from below to the disc plates (6)with M16 bolts (5) and spring washers. Dono tighten the bolts. Then inserte M12 bolts (1) withwashers from above and place them through the holein the tine arm. Push on the semi-round support (3)as shown in the illustration. When all tine arms havebeen fitted as described, place the reinforcement ringon the bolts and secure the bolts with nuts and washers.For the torque settings, see chapter 4 "Care andmaintenance".654123KW-0-06740