Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7.4 Fixed lightingA permanently fixed lighting system can be mounted onall rotary tedders. To fit the system, unscrew the bracketsfor fitting the removeable lights on the warning signs(1). In the middle of the square warning signs and at thelower end of the oblong warning signs there is a hole(3) through which the supply cable to the lamps (2) canbe passed. Next to this hole are two further holes whichcan be used for screwing the lights in place. Screwback lights (4) onto the rear warning signs as shown inthe illustration.12413KW-0-<strong>00</strong>5The cables of the lighting system should be routedalong the protective frame to a point below the carrierbar (1). Fix the cable to the frame with cable ties. Thebracket for the plug connector between the tractor andthe light connection cable should be mounted to thecarrier bar (4). Connect the plug-in connectors andscrew the connectors to the retaining panel. Check thatthe lighting system works. The cables should also besecured to the carrier bar with cable ties at the holes (3)provided. The illustration shows the carrier bar as seenfrom below.33214KW-0-03435
Change language