Operating Instructions 150 000 019 00 EN

The PTO shaft stup (1) is designed for spreading andtedding. To lay night swathes, push the PTO shaft ontostup (2).As the swathes are deposited by thesame swather discs that are used fortedding, ideal spreading is assured afterthe swathing process.It is essential to place a protective coveron the free PTO stup shaft.1 2KW-0-0307.2 Additional tine loss safety mechanism• For all care, maintenance, repairand assembly work on the rotarytedder, always switch off the PTOshaft.• Switch off the engine and removethe ignition key.• Protect the tractor and rotarytedder from rolling!Apart from the standard tine loss safety mechanism(5),it is possible to fit an additional tine securingmechanism. Per tine, it consists of:- one cable- two cable clamps, each with- two flat round washers and safety washersFit the cable (4) with the cable clamps (3) to theswather tines (1). Seen in the direction of rotation, thecable must be behind the swather tine. The nuts (2) ofthe cable clamps must face outwards.5421Additional tine loss protectionOrder-No.: 153 479 03KW-1-02032