Operating Instructions 150 000 019 00 EN

7. Special accessories7.1 Night swathing gearboxThe rotary tedder can be equipped with a nightswathing gearbox.The following parts are supplied:- Night swathing gearbox (1) (maintenance-free due topermanent grease filling)- Two angle brackets (2)- Protecting pot (3)- Clamp fitting (4)- Four bolts with nuts and washers1342KW-0-027To mount the night swathing gearbox (1), dismantle thePTO shaft from the rotary tedder drive (cf. chapter 2.2"Preparations on the tractor and rotary tedder"). Fitthe protecting pot (3) and fix with the clamp fitting (4).1On the KW 7.70 and KW 8.80, the existingPTO shaft guard must be dismantled.Fix the angled bracket (2) to the designed holes withbolts (5) and nuts on the left and right side of the carrierbar.423On the KW 5.50, fit the angled brackets insuch a way that the short bevelledsurface points forwards. This is wherethe night swathing gearbox is bolted.Push the night swathing gearbox onto the PTO shaftstup of the rotary tedder and bolt it to the angledbrackets.2KW-0-028In case of the types KW 5.50 and KW 6.70, shorten theguard of the pto drive shaft(a = max. 80 mm).Check PTO shaft length!aKW-1-00131