Operating Instructions 150 000 019 00 EN

4.3 HydraulicsThe rotary tedder has a hydraulic cylinder with anintegrated hydraulic accumulator (1) in the edgespreading mechanism. The system is maintenancefree.14.4 GearboxThe cylinder unit is under pressure.If a defect occurs, the complete unit mustbe replaced.Hose lines are subject to ageing.As a rule, they should be replaced everysix years.KW-0-037The main gearbox of the rotary tedder is grease filled and needs no maintenance.Designation/Brand Quantity litFlowing gearbox grease GFO 35 0,5 l4.5 Tyres• Repair work on the tyres must only be carried out by qualified personnel and with suitableequipment.• Before repair work begins, make sure that the rotary tedder is at a standstill. Switch off theengine and remove the ignition key.• Place the rotary tedder on a firm, level surface. Fit wheel blocks to protect it from accidentalrolling.• Check the air pressure regularly.Pressure [bar]Undercarriage wheels (Single Axle) 1,5Undercarriage wheels (Single Axle) 2,04.6 Lubrication points on the rotary teddersPTO shaftThe specified lubrication intervalsrefer to hours of operation!8h 8h 20h8hThe PTO shaft(s) on the machine should be greased atthe points shown in the illustration at the time intervalsshown. At the same time, observe the operatinginstructions of the PTO shaft manufacturer.40h40h8hGelenkwelle25