Operating Instructions 150 000 019 00 EN

3.5 Edge spreading mechanismThe undercarriage wheel setting can be seen on thepointer (1). It is situated to the right of the carrier bar inforward direction.To keep the load on the running wheelsas low as possible, avoid cornering tootightly when boundary spreading is set.1KW-0-035To adjust the edge spreading mechanism, raise therotary tredder. Switch the hydraulic switchover valve (1)to position "b" (edge spreading mechanism). The edgespreading mechanism can be adjusted from the controlvalve on the tractor. The setting of the undercarriagewheels can be seen on the pointer.1abKW-0-0483.6 StabilizersFor rotary tedders with a large working width, themachine could start to wobble on uneven ground. Agreater pre-tensioning of the stabilizers can suppressthis effect. To achieve this, tighten the screws (1) of thefriction plates (2) on the stabilizer tubes (3).1Do not tighten the friction plates tootightly, or the stabilizers may lock!23KW-0-02622