You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Switch off the engine and remove theignition key. Protect the tractor fromrolling. Only then pull off the PTO shaft.Loosen the holding chain, pull off the PTO shaft and layit on the PTO shaft support bracket (1).The holding chains of the protectivetubes are not designed or suitable forholding up the PTO shaft.1KW-4-<strong>00</strong>7Depressurize the hydraulic systembefore pulling off the hydraulic hoses.1• Pull off the hydraulic hose (2). (one hydraulic hosefor KW 5.50/4x7, KW 6.70/6 and KW 7.70/6x7; twohydraulic hoses for KW 8.80/8)• Take the hydraulic switchover valve (1) from thebracket on the tractor and place it in thecorresponding bracket (4) on the rotary tedder.• Insert the coupling of the hydraulic hose into thebracket (3) on the three-point frame.• Disconnect the control cable (for kW 5.50/4x/, KW6.70/6 and KW 7.70/6x7) and the electrical lightingcable from the tractor and place them on the rotarytedder.• Remove the upper and lower link arms.342KW-0-01<strong>019</strong>
Change language