Operating Instructions 150 000 019 00 EN

2.7 Conversion from working totransport position• Make sure that no persons are in theswivel area of the outer swatherdiscs.• Before driving on public roads,attach all protective devices,warning signs and lights, checkthem and make sure that they work.The PTO shaft must be switched offbefore the outer swather discs are liftedinto transport position.Set edge spreading mechanism tocentral position.Select position a "Raise/lower outer swather discs"on the switchover valve (1). Lift the outer swather discsby operating the tractor hydraulic system.12abKW-0-049KW 5.50/4x7; KW 6.70/6 and KW 7.70/6x7Raise the outer swather discs until the locking devices(1) have fully clicked into place.Be sure that the transport locking devicehas correctly engaged and that thecontrol cable is not taut.1KW 8.80/8KW-0-051Lift outer swather disks until the cylinders have travelledcompletely inward. Close shut-off valve (1).Before raising the rear hydraulics, checkthat the rear window of the tractor cabinis closed. Otherwise, the protectiveframe could cause damage.Attach the lighting system. Check that the lights work.1The swather disk arms are secured intransport position with hydraulic stopvalves on the hydraulic cylinders. In casesof transport journeys, the shut-off valve (1)must be closed and the tractor operationvalve must be blocked!KW-4-00117